Get ready for the Ontario 307A Steamfitter certifying exam, which is the Red Seal Steamfitter/Pipefitter exam. Practise on original multiple-choice questions that follow the official exam breakdown, with a plain explanation for every answer.
100% money back guarantee·1Try free2Pay $19.993Instant access + email link sent
Question 6Full test
When several workers service the same isolated system, how should lockout be done?
One lock for the whole crew is enough
Only the first worker on site places a lock
The supervisor locks out for everyone verbally
Each worker applies a personal lock
Next question →
No login needed
100% money-back guarantee
Built from the official syllabus and sources
One payment, no subscription
Home › Tests › 307A Steamfitter Exam Practice Test (Red Seal)
Free test: 5 questions
Try 5 free questions from five areas of the exam: common skills, fabrication, rigging, steam and condensate, and heating and process piping. You will see the right answer and the reason after each one below, no login needed.
Question 1 of 5Free test
5 questionsAbout 6 minInstant feedback
Loading question 1…
Tap an answer to see straight away if it is right, with a full explanation. Your scores are saved on this device only.
The 307A Steamfitter exam is the certifying exam for steamfitters in Ontario. It is the Red Seal Steamfitter/Pipefitter exam: 130 multiple-choice questions on steam, hydronic and process piping, fabrication and rigging. Apprentices write it after finishing their apprenticeship to earn a Certificate of Qualification and the Red Seal endorsement.
307A steamfitter exam at a glance
Item
What the official sources say
Questions
130 multiple-choice questions (Red Seal exam breakdown)
Writing time
Four hours
Pass mark
70%
Trade status in Ontario
Compulsory trade, part of the Red Seal Program as Steamfitter/Pipefitter
Apprenticeship
9,000 hours: 8,280 on the job and 720 in school, over three levels
Certificate
Certificate of Qualification from Skilled Trades Ontario, with a Red Seal endorsement
Always check your Authorization to Test letter for the details of your own sitting. Exam fees are set by Skilled Trades Ontario.
How the exam is weighted
Red Seal questions come from the Red Seal Occupational Standard for Steamfitter/Pipefitter. The official breakdown gives each major work activity a set number of questions, and our seven sections follow them.
Major work activity
Red Seal questions
A. Common occupational skills
16
B. Layout, fabrication and piping installation (including valves and heat tracing)
29
C. Rigging, hoisting, lifting and positioning
15
D. Low and high pressure steam and condensate systems
24
E. Heating, cooling and process piping systems (hydronic, process, water treatment, hydraulic, HVACR, fuel, medical gas, compressed air)
27
F. Renewable energy systems (geo-exchange, solar heating, heat recovery)
8
G. Commissioning, start-up and turnover
11
Fire protection systems are not common core, so the Red Seal exam asks no questions on them.
How to prepare
Use the exam breakdown to find your weaker areas, and study the occupational standard, not only your college notes, because the exam covers the trade across Canada. Practise the calculations until they are quick: offsets and take-outs, thermal expansion, sling angles and load weights, Btu/h from flow, and hydraulic force. Then drill one section at a time here and read every explanation.
Checked against the Red Seal Program and Skilled Trades Ontario on November 14, 2026. Last reviewed: November 2026.
Aptitude Tests Canada is an independent practice platform. We are not affiliated with or endorsed by Skilled Trades Ontario, the Red Seal Program or the Government of Ontario. Our questions are original practice questions, not real exam questions.
Free study guide by email
What the test covers, how it is marked and how to prepare, for 307A Steamfitter (Red Seal). One email, no account.
By submitting, you agree that Aptitude Tests Canada (TestReady Group, [email protected]) may email you the free study guide for your test. You can unsubscribe at any time with the link in every email. See our Privacy Policy.
Get the full 307A steamfitter practice pack
Every question in the full bank, a clear explanation for each answer, and practice section by section, on your phone or computer.
One-time payment · 30 days access · 100% money-back guarantee
Full access30 days
Common occupational skills15 questions
Layout, fabrication and piping installation19 questions
Rigging, hoisting and lifting14 questions
Timed practice104 questions in total, marked at the end
Start
Questions and answers
How many questions are on the 307A steamfitter exam?
The Red Seal Steamfitter/Pipefitter exam has 130 multiple-choice questions, split across seven major work activities.
What is the pass mark?
The pass mark is 70%, and you have four hours to write.
Is steamfitter a compulsory trade in Ontario?
Yes. Skilled Trades Ontario lists Steamfitter as a compulsory trade, so you need a registered training agreement, a provisional certificate or a Certificate of Qualification to work in it.
How long is the steamfitter apprenticeship in Ontario?
About 9,000 hours: 8,280 hours on the job and 720 hours of in-school training over three levels.
Which topics carry the most questions?
Layout, fabrication and piping installation has 29 questions, heating, cooling and process piping 27, and steam and condensate systems 24.
Are these real Red Seal questions?
No. They are original practice questions written to the Red Seal occupational standard and exam breakdown.
Your progress on this test is saved on this device.
Not ready to unlock? Get the free study guide
What the test covers, how it is marked and how to prepare, for 307A Steamfitter (Red Seal). One email, no account.
By submitting, you agree that Aptitude Tests Canada (TestReady Group, [email protected]) may email you the free study guide for your test. You can unsubscribe at any time with the link in every email. See our Privacy Policy.